Welcome to the International Class Association website for the RS Aero. Here you will find all there is to know about the RS Aero including the latest news, how to register your boat, and links to relevant documents.
| Home >> Technical >> Fitting a new tiller extension |
Steve Cockerill has done a good video on u tube that takes you through the process. Worth a look.
Reply
Reply
28/12/2019 21:38:00
Whizzer
Posts: 7
I have a new carbon tiller extension for my Aero but I'm not sure how to fit the universal joint to it.
The UJ from RS (https://www.rssailingstore.com/Other-stock/S/Selden-Tiller-Extension-UJ-CA0015) has a small metal peg in the packet which can be seen in the photo on the above link but I don't know what that peg is for. There is also a rubber tube which I assume goes over the extension and UJ once it is fitted?
There is no screw hole in the carbon extension so presumably I need to drill a hole in the carbon to match the small screw hole in the rubber joint?
If anyone knows how to fit this correctly I'd appreciate some tips
Reply
Reply
28/12/2019 20:43:00
Schweben
Posts: 4
