Welcome to the International Class Association website for the RS Aero. Here you will find all there is to know about the RS Aero including the latest news, how to register your boat, and links to relevant documents.

home
news
the boat
gallery
movies
forum
membership
documents
boat registration


Please Register or Login to post to the forum.
Home >> Technical >> Trolley Dimensions - for roof racks, trailers, ferry bookings etc.
19/11/2019 16:25:00

tomdobbs
Posts: 15
I also slid carriage bolts onto the roof bar slots and fixed them in positions which guided the trolley on and stopped it careering off the front!




Reply
19/11/2019 11:20:00

Mark J Cole
Posts: 12
Make sure the roof-rack bars are wide enough to support the trolley.  I made an assumption when originally purchasing my car with standard Volvo branded racks, only to find out that they were too short.




Reply
19/11/2019 10:39:00

Karlijn
Posts: 3
Hi, let's talk roofracks! 
I am looking to transport my Aero on a Kia Cee'd, but there is so much to choose from.. What aspects should I consider? F.e. what should be the minimum weight for the roofrack? Thanks in advance! 




Reply
06/06/2017 20:24:45

ChrisH
Posts: 5
Good info thanks chris




Reply
06/06/2017 15:39:12

Peter Barton
Posts: 2588
Whilst on the subject of trolleys, here is a measurement diagram for the Mk2 RS supplied trolley that Jonathan Rickels produced when he was arranging a trailer base.
Thanks Jonathan!
 
It might prove useful to some RS Aero owners at some stage as a guide.  It is still always worth checking your own though, as there may be small variations whist specs were finalised or improved on.
 
 




Reply
06/06/2017 10:51:44

Peter Barton
Posts: 2588
Hi Chris,
I got to measure high and low RS supplied trolleys for you yesterday; 
 
Mk1 - low gunwale support with short front handle stalk (from June 2014).
The top of the deck is 43cm above the bottom of the base of the trolley
 
Mk2 - high gunwale support with long front handle (from March 2015).
The top of the deck is 50cm above the bottom of the base of the trolley
 
Mk3 - adjustable high or low support with long front handle (from May 2017).
By bolting the gunwale supports into either the top or bottom sections of the horizontal alu frame there is a choice of two settings, high and low, equating to the previous heights i.e. deck about 43cm or 50cm above the bottom of the base of the trolley.
 
The Mk1 evolved to the Mk2 as the combination of low gunwale supports and a short front handle meant that you had to be careful not to scrape the bottom of your transom and tall sailors had to stoop down when pulling their trollies.
However, there are some advantages with the low trolley supports; 
- launch recover more easily from shallower water 
- more compact for roof rack travel on the trolley
- fit into tighter multi rack trailers 
- slight increased stability ashore
Hence the Mk3 is now available, combining the benefit of both ways. A choice of high or low supports with the long front handle to avoid the need to stoop.




Reply
29/05/2017 18:46:07

[email protected]
Posts: 4
Chris H, If you have the latest design, with high gunwale supports and need the lower, mark one design and are within striking distance of Hertfordshire, then I might be prepared to swap.




Reply
29/05/2017 14:09:20

Peter Barton
Posts: 2588
ChrisH, 
You will need to specify, do you have a trolley with the high or low gunwale supports?




Reply
29/05/2017 09:42:06

ChrisH
Posts: 5
How much height does adding the boat the lauching trolley add on a roof rack. 

Thanks Chris




Reply


RS Aero

RS Sailing

Contact

RS Aero International Class Association
E. Email


RS Sailing
Premier Way
Abbey Park
Romsey
Hampshire
SO51 9DQ

T. 00 44 (0)1794 526 760
W. www.rssailing.com
E. Email

Developed & Supported by YorkSoft Ltd