Welcome to the International Class Association website for the RS Aero. Here you will find all there is to know about the RS Aero including the latest news, how to register your boat, and links to relevant documents.
| Home >> Technical >> halyard cleat not holding |
The cleat at the top takes all the load. The bottom cleat which is plastic is only to secure the excess cord and not any load.
I create a loop above the cleat and hook an elastic cord to it. With plenty of vang the downhaul will pop of the mushroom.
Reply
23/08/2023 16:42:00
Mark1654
Posts: 13
I had the same. Cleat just gets worn, I replaced it. Slghtly scary as it's riveted but the tech at my club has a riveter and a fearless disposition
Reply
Reply
22/08/2023 16:07:00
AndyJackson
Posts: 19
22/08/2023 09:37:00
neonerl
Posts: 5
I've upgraded to the main halyard upgrade which is a continuous tapered rope. It make putting the sail up very easy, but despite being apparently 3mm ie the same as the standard halyard tail, the lower mast cleat doesn't hold the tail reliably. Any ideas?
Reply
Reply
30/07/2023 13:40:00
AndrewRear
Posts: 1
