Welcome to the International Class Association website for the RS Aero. Here you will find all there is to know about the RS Aero including the latest news, how to register your boat, and links to relevant documents.
| Home >> Technical >> Rudder fitting |
23/01/2015 10:14:25
Posts: 0
Thanks Peter. Yes, it's a really snug fit which is great and it feels nice when helming, Just the right load etc. I may just have a tight clip so I might try a bit of silicon spray on it. Feel free to take a look but I am not around Sunday. Cheers.
Reply
Reply
22/01/2015 17:23:26
Posts: 0
Mine takes a bit of wiggling but I'd hate there to be any slack. What I would quite like is a big wing nut so I could tighten the bolt a shade more easily and potentially slacken when coming in. I don't want ANY give in rudder fittings.
Reply
Reply
22/01/2015 16:24:08
Gareth
Posts: 176
Andy, I can have a check on Sunday and Junior might be down too.
I would much rather it was tight than lose, but we can have a look .
Reply
22/01/2015 16:14:19
Peter Barton
Posts: 5132
Had a nice sail out to the solent this lunchtime in 1176 with Simon W, sunny and a gently F3.
Really like the boat but has anyone else got a really tight fit on their rudder Gudgeon and pintle? I slid the the blue clip but it barely moved and I found it a real struggle to lift the rudder off without lifting the boat off the trolley. In the end some serious wiggling did it but with cold fingers it was pretty tricky! Hopefully it may become a little easier in time.
Reply
Reply
22/01/2015 16:04:56
Posts: 0
