Welcome to the International Class Association website for the RS Aero. Here you will find all there is to know about the RS Aero including the latest news, how to register your boat, and links to relevant documents.
| Home >> Technical >> Screw pinning down hiking strap block came loose |
After attempting a temp fix with Sikaflex, I filled the worn out holes with epoxy two pack (Gorilla type), redrilled and put new screws in. I think I used the next bigger screw size, thus avoiding the thread biting at exactly the interface of Epoxy with GRP. As always, patience to wait and warm enough temperatures are the pre-requisites for succesful curing of the epoxy :)
Reply
Reply
26/09/2022 13:44:00
Matt
Posts: 19
Hello
Anyone had a similar issue in the past or knows how I should handle this issue? I'm not sure what to use to repair this one?
Greetings,
Stef
Reply
Anyone had a similar issue in the past or knows how I should handle this issue? I'm not sure what to use to repair this one?
Greetings,
Stef
Reply
25/09/2022 11:42:00
Stef1255
Posts: 1
